|
L7905CV-DG Datasheet, PDF (10/24 Pages) STMicroelectronics – Negative voltage regulators | |||
|
◁ |
Electrical characteristics
L79xxC
Refer to the test circuits, TJ = 0 to 125 °C, VI = -23 V, IO = 500 mA, CI = 2.2 µF, CO = 1 µF
unless otherwise specified.
Table 7. Electrical characteristics of L7915C
Symbol
Parameter
Test conditions
Min. Typ. Max. Unit
VO Output voltage
TJ = 25°C
-14.4 -15 -15.6 V
VO Output voltage
IO = -5 mA to -1 A, PO ⤠15 W
VI = -18.5 to -30 V
-14.3 -15 -15.7 V
ÎVO(1) Line regulation
VI = -17.5 to -30 V, TJ = 25°C
VI = -20 to -26 V, TJ = 25°C
300
mV
150
ÎVO(1) Load regulation
IO = 5 mA to 1.5 A, TJ = 25°C
IO = 250 to 750 mA, TJ = 25°C
300
mV
150
Id
Quiescent current
TJ = 25°C
3
mA
ÎId
IO = 5 mA to 1 A
Quiescent current change
VI = -18.5 to -30 V
0.5
mA
1
ÎVO/ÎT Output voltage drift
IO = 5 mA
-0.9
mV/°C
eN Output noise voltage
B = 10Hz to 100kHz, TJ = 25°C
250
µV
SVR Supply voltage rejection ÎVI = 10 V, f = 120Hz
54
60
dB
Vd Dropout voltage
IO = 1 A, TJ = 25°C, ÎVO = 100 mV
1.1
V
Isc Short circuit current
1.3
A
1. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be
taken into account separately. Pulse testing with low duty cycle is used.
10/24
Doc ID 2149 Rev 21
|
▷ |