X-NUCLEO-IDB05A1 Datasheet, PDF (1/7 Pages) STMicroelectronics – Bluetooth Low Energy expansion board based on the SPBTLE- RF module for STM32 Nucleo

X-NUCLEO-IDB05A1
Bluetooth Low Energy expansion board based on the SPBTLE-
RF module for STM32 Nucleo
Data brief
Features
 STM32 expansion board based on the
SPBTLE-RF module for STM32 Nucleo
 X-NUCLEO-IDB05A1 contains FCC and IC
certified module SPBTLE-RF (FCC ID:
S9NSPBTLERF and IC: 8976C-SPBTLERF)
 SPBTLE-RF:
 Bluetooth Low Energy FCC and IC
certified module based on Bluetooth^®
SMART 4.1 network processor
BlueNRG-MS
 Integrated Balun (BALF-NRG-01D3)
 Chip antenna
 Compatible with STM32 Nucleo boards
 Equipped with Arduino UNO R3 connector
 Scalable solution, capable of cascading
multiple boards for larger systems
 Free comprehensive development firmware
library and example for BlueNRG-MS,
compatible with STM32Cube firmware
 RoHS compliant
Description
The X-NUCLEO-IDB05A1 is a Bluetooth Low
Energy evaluation board based on the SPBTLE-
RF BlueNRG-MS RF module to allow expansion
of the STM32 Nucleo boards. The SPBTLE-RF
module is FCC (FCC ID: S9NSPBTLERF) and IC
certified (IC: 8976C-SPBTLERF).
The X-NUCLEO-IDB05A1 is compatible with the
ST Morpho and Arduino UNO R3 connector
layout (the user can mount the ST Morpho
connectors, if required). The X-NUCLEO-
IDB05A1 interfaces with the STM32
microcontroller via the SPI pin, and the user can
change the default SPI clock, the SPI chip select
and SPI IRQ by changing one resistor on the
evaluation board.
July 2015
DocID027862 Rev 1.0
For further information contact your local STMicroelectronics sales
office
1/7
www.st.com