VX6953CB Datasheet, PDF (1/107 Pages) STMicroelectronics – 5.1 megapixel EDOF camera module

VX6953CB
5.1 megapixel EDOF camera module
Features
• Extended depth of field (EDoF) technology
• Data formats: RAW8, RAW10 and 10-8
compressed
• SMIA profile 2 compliant
• MIPI CSI-2 (D-PHY v1.0 compliant) and SMIA
CCP2 video data interface
• Maximum data rate: 640 Mbps for CCP2 and
800 Mbps for CSI-2
• 100 KHz to 400 KHz CCI command interface
• EMC shielding
• Ultra low power standby mode, 30 μW (typ.)
• Binning modes (2 x 2)
• HD video formats (1080p30, 720p30)
• Pixel defect correction
• Nine terms lens shading corrections, bi-cubic
correction data available
• 512-byte NVM memory for calibration
Datasheet - production data
Description
The VX6953CB camera module is designed for
use across a range of mobile phone handsets and
accessories. It embeds high quality still camera
functions and also supports HD video.
The VX6953CB produces raw Bayer 5 Mpixel
images at 15 fps in RAW10. It supports the CCI
control as well as CCP 2.0 and CSI-2 data
interfaces.
The module design is optimized for both footprint
and height. It provides excellent image quality at
focus distances from 15 cm in “Super macro
mode” (bar code) and from 40 cm to infinity in
“Normal mode”.
A separate hardware accelerator device (for
example, an STV0987) can be integrated in the
phone system to run the associated image
processing algorithms in hardware where the
baseband cannot support this processing load.
The sensor is designed to work with any other
host with a MIPI or SMIA interface.
March 2013
This is information on a product in full production.
8209023 Rev 5
1/107
www.st.com
1