VS6725 Datasheet, PDF (1/5 Pages) STMicroelectronics – 2 megapixel single-chip camera module

VS6725
VS6735
2 megapixel single-chip camera module
Data Brief
Features
■ VS6725: 8-bit parallel interface with external
syncs
■ VS6735: MIPI CSI-2 serial interface
■ 2 megapixel resolution (1600H x 1200V)
■ 1.75 µm pixel size, 1/5 inch optical format
■ 15 fps UXGA progressive scan
■ SXGA emulation with FFOV output
■ Low power 30 fps SVGA progressive scan for
video capture
■ RGB Bayer color filter array
■ Integrated 10-bit ADC
■ Integrated digital image processing functions,
including defect correction, noise reduction,
lens shading correction, image scaling,
demosaicing, peaking, gamma correction and
color space conversion.
■ Embedded camera controller for automatic
exposure control, automatic white balance
control, black level compensation, 50/60 Hz
flicker detection and cancelling, flashgun
support.
■ Fully programmable independent H and V
scaling with derating
■ ITU-R BT.656-4 YUV (YCbCr) 4:2:2, RGB 565,
RGB 444 output formats
■ 8-bit parallel video interface, horizontal and
vertical syncs, 80 MHz (max) clock (VS6725)
■ MIPI CSI-2 interface option (VS6735)
■ Two-wire serial control interface
■ On-chip PLL, 6 to 27 MHz clock input
■ Analog power supply, from 2.4 V to 3.05 V
■ Separate I/O power supply, 1.8 V or 2.8 V
levels
■ Integrated power management with power
switch, automatic power-on reset and power-
safe pins
■ Low power consumption, ultra low standby
current
■ 3-element lens, F#2.8, 52 degree horizontal
field of view (HFOV)
■ 6.0 mm x 6.0 mm x 4.0 mm fixed focus camera
module with embedded passives
■ 20-pin socket
Description
The VS6725/VS6735 is a CMOS color digital
camera featuring low size and low power
consumption for mobile applications. It integrates
a high-sensitivity pixel array, a digital image
processor and camera control functions.
The VS6725/VS6735 is capable of streaming
UXGA video up to 15fps, with ITU-R BT.656-4
YUV 4:2:2 frame format or 30fps SVGA using
analog binning.
It supports 1.8 V/2.8 V digital interface and
requires a 2.4 V to 3.05 V analog power supply. If
required, the VS6725/VS6735 can operate as a
2.8 V single supply camera. The integrated PLL
allows for low frequency system clock, and
flexibility for successful EMC integration.
This complete camera module is ready to connect
to camera enabled baseband processors, back-
end IC devices or PDA engines.
February 2008
Rev 1
For further information contact your local STMicroelectronics sales office.
1/5
www.st.com
5