VS6451_07 Datasheet, PDF (1/4 Pages) STMicroelectronics – Ultra small CIF+ reflowable camera module

VS6451
Ultra small CIF+ reflowable camera module
Data Brief
Features
■ CIF+ resolution sensor (384x320 or 320x384)
■ Electrical and logical interface fully SMIA
compliant
■ Video data interface - CCP2.0
■ Command interface - CCI
■ 2.8 V/1.8 V operation
■ On-board 10 bit ADC
■ Small physical size
■ Integral EMC shielding
■ Ultra low power standby mode
■ On-chip PLL
■ Lead free reflowable module
Applications
■ Mobile phone
■ PDA
■ Videophone
Description
This data brief outlines an ultra small reflowable
CIF+ camera module (VS6451) for use across a
range of mobile phone handsets and accessories.
It is primarily designed to be used as a second
camera in video conferencing applications, but
could equally be used as a primary camera. The
camera silicon device is SMIA class 2 profile 0
compliant and is capable of generating raw bayer
CIF+ images up to 30 fps. The VS6451 supports
the CCI control and CCP2.0 data interfaces.
As different phone platforms have different
baseband processors with varying capabilities, it
may not be possible for all phones to support the
associated image processing algorithms. Where
the baseband cannot support this processing
load, a separate hardware accelerator (STV0984)
device can be incorporated in the phone system
to run the algorithms in hardware. The STV0984
processor can support 2 cameras. The
specifications of these devices are contained in a
separate document.
The module design is optimized to provide an
ultra small footprint and height, and is designed to
be reflowable at lead-free solder profiles. The
product is lead free.
The lens design is optimized for video conferen-
cing and maintains its performance even after the
high temperatures of lead-free reflow.
VS6451 offers an ultra low power consumption
hardware standby mode consuming less than
30 µW.
March 2007
Rev 2
For further information contact your local STMicroelectronics sales office.
1/4
www.st.com
4