English
Language : 

VPS2535H Datasheet, PDF (1/30 Pages) STMicroelectronics – Double channel high-side driver with analog current sense
VPS2535H
Double channel high-side driver with analog current sense
0OWER33/ 
("1($'5
Features
Max transient supply voltage
Operating voltage range
Typ on-state resistance (per ch.)
Current limitation (typ)
Off-state supply current
VCC
VCC
RON
ILIM
IS
58 V
8 to 36 V
35 mΩ
42 A
2 µA
• General
– Very low standby current
– 3.0 V CMOS compatible input
– Optimized electromagnetic emission
– Very low electromagnetic susceptibility
– Fault reset standby pin (FR_Stby)
• Diagnostic functions
– Proportional load current sense
– High current sense precision for wide range
currents
– Off-state open load detection
– Output short to VCC detection
– Overload and short to ground latch off
– Thermal shutdown latch-off
– Very low current sense leakage
• Protections
– Undervoltage shutdown
– Overvoltage clamp
– Load current limitation
– Self limiting of fast thermal transients
Datasheet − production data
– Protection against loss of ground and loss
of VCC
– Thermal shutdown
– Electrostatic discharge protection
Application
All types of resistive, inductive and capacitive
loads
Description
The VPS2535H is a monolithic device made
using STMicroelectronics® VIPower® technology,
intended for driving resistive or inductive loads
with one side connected to ground. Active VCC
pin voltage clamp protects the device against low
energy spikes.
The device integrates an analog current sense
which delivers a current proportional to the load
current.
Fault conditions such as overload,
overtemperature or short to VCC are reported via
the current sense pin.
Output current limitation protects the device in
overload conditions. The device latches off in
case of overload or thermal shutdown.
The device is reset by a low level pass on the fault
reset standby pin.
A permanent low level on the inputs and on the
fault reset standby pins disables all outputs and
sets the device in standby mode.
January 2016
This is information on a product in full production.
DocID028862 Rev 1
1/30
www.st.com