VNQ830PEP-E Datasheet, PDF (1/27 Pages) STMicroelectronics – Quad channel high side driver

VNQ830PEP-E
Quad channel high side driver
Features
Type
VNQ830PEP-E
R_DS(on)
60mΩ⁽¹⁾
1. Per each channel.
I_OUT
14A⁽¹⁾
V_CC
36V
■ CMOS compatible inputs
■ Open drain status outputs
■ On-state open load detection
■ Off-state open load detection
■ Shorted load protection
■ Undervoltage and overvoltage shutdown
■ Loss of ground protection
■ Very low standby current
■ Reverse battery protection^(a)
■ In compliance with the 2002/95/EC european
directive
PowerSSO-24
Description
The VNQ830PEP-E is a monolithic device made
using| STMicroelectronics VIPower™ M0-3
Technology. The VNQ830PEP-E is intended for
driving any type of multiple load with one side
connected to ground.
The Active V_CC pin voltage clamp protects the
device against low energy spikes (see ISO7637
transient compatibility table).
Active current limitation combined with thermal
shutdown and automatic restart protects the
device against overload. The device detects the
open load condition in both the on and off-state.
In the off-state the device detects if the output is
shorted to V_CC. The device automatically turns off
in the case where the ground pin becomes
disconnected.
a. See Application schematic on page 16
Table 1. Device summary
Package
PowerSSO-24
Tube
VNQ830PEP-E
Order codes
Tape and reel
VNQ830PEPTR-E
July 2009
Doc ID 10871 Rev 7
1/27
www.st.com
1