VNQ830P-E Datasheet, PDF (1/28 Pages) STMicroelectronics – Quad channel high-side driver

VNQ830P-E
Quad channel high-side driver
Features
Type
VNQ830P-E
R_DS(on)
65 mΩ⁽¹⁾
I_OUT
6A
V_CC
36 V
1. Per each channel.
■ ECOPACK^®: lead free and RoHS compliant
■ Automotive Grade: compliance with AEC
guidelines
■ Very low standby current
■ CMOS compatible input
■ On-state open-load detection
■ Off-state open-load detection
■ Thermal shutdown protection and diagnosis
■ Undervoltage shutdown
■ Overvoltage clamp
■ Output stuck to V_CC detection
■ Load current limitation
■ Reverse battery protection
■ Electrostatic discharge protection
SO-28 (double island)
Description
The VNQ830P-E is a quad HSD formed by
assembling two VND830P-E chips in the same
SO-28 package. The VND830P-E is a monolithic
device made using| STMicroelectronics™
VIPower™ M0-3 technology. The VNQ830P-E is
intended for driving any type of multiple load with
one side connected to ground.
The active V_CC pin voltage clamp protects the
device against low energy spikes (see ISO7637
transient compatibility table). Active current
limitation combined with thermal shutdown and
automatic restart protects the device against over-
load. The device detects the open-load condition
in both the on and off-state.
In the off-state the device detects if the output is
shorted to V_CC. The device automatically turns off
in the case where the ground pin becomes
disconnected.
Table 1.
Device summary
Package
SO-28
May 2010
Tube
VNQ830P-E
Doc ID 10861 Rev 3
Tape and reel
VNQ830PTR-E
1/28
www.st.com
1