|
VNQ5E250AJ-E Datasheet, PDF (1/37 Pages) STMicroelectronics – Quad channel high-side driver with analog current sense for automotive applications | |||
|
VNQ5E250AJ-E
Quad channel high-side driver with analog current sense
for automotive applications
Features
Max supply voltage
VCC 41 V
Operating voltage range
VCC 4 to 28 V
Max on-state resistance (per ch.) RON 250 mΩ
Current limitation (typ)
Off-state supply current
ILIMH
IS
5A
2 µA(1)
1. Typical value with all loads connected.
â General
â Inrush current active management by
power limitation
â Very low standby current
â 3.0 V CMOS compatible inputs
â Optimized electromagnetic emissions
â Very low electromagnetic susceptibility
â Compliant with European directive
2002/95/EC
â Very low current sense leakage
â Diagnostic functions
â Proportional load current sense
â High current sense precision for wide
currents range
â Current sense disable
â Off-state open-load detection
â Output short to VCC detection
â Overload and short to ground (power
limitation) indication
â Thermal shutdown indication
â Protections
â Undervoltage shutdown
â Overvoltage clamp
â Load current limitation
â Self limiting of fast thermal transients
â Protection against loss of ground and loss
of VCC
PowerSSO-16
â Overtemperature shutdown with auto
restart (thermal shutdown)
â Reverse battery protected
â Electrostatic discharge protection
Applications
â All types of resistive, inductive and capacitive
loads
â Suitable as LED driver
â Suitable as relays driver
Description
The VNQ5E250AJ-E is a quad channel high-side
driver manufactured using ST proprietary
VIPower⢠M0-5 technology and housed in
PowerSSO-16 package. The device is designed
to drive 12 V automotive grounded loads, and to
provide protection and diagnostics. It also
implements a 3 V and 5 V CMOS compatible
interface for the use with any microcontroller.
The device integrates advanced protective
functions such as load current limitation, inrush
and overload active management by power
limitation, overtemperature shut-off with auto-
restart and overvoltage active clamp. A dedicated
analog current sense pin is associated with every
output channel providing enhanced diagnostic
functions including fast detection of overload and
short-circuit to ground through power limitation
indication, overtemperature indication, short-
circuit to VCC diagnosis and on-state and off-state
open-load detection. The current sensing and
diagnostic feedback of the whole device can be
disabled by pulling the CS_DIS pin high to share
the external sense resistor with similar devices.
September 2013
Doc ID 17360 Rev 3
1/37
www.st.com
1
|
▷ |