VNQ5E050K-E Datasheet, PDF (1/34 Pages) STMicroelectronics – Quad channel high side driver for automotive applications

VNQ5E050K-E
Quad channel high side driver for automotive applications
Features
Max transient supply voltage
Operating voltage range
Max on-state resistance (per ch.)
Current limitation (typ)
Off-state supply current
V_CC
41V
V_CC 4.5 to 28V
R_ON 50 mΩ
I_LIMH
I_S
27 A
2 µA⁽¹⁾
1. Typical value with all loads connected.
■ General
– Inrush current active management by
power limitation
– Very low stand-by current
– 3.0 V CMOS compatible inputs
– Optimized electromagnetic emissions
– Very low electromagnetic susceptibility
– In compliance with the 2002/95/EC
european directive
■ Diagnostic functions
– Open drain status output
– On-state open-load detection
– Off-state open-load detection
– Output short to Vcc detection
– Overload and short to ground (power
limitation) indication
– Thermal shutdown indication
■ Protections
– Undervoltage shutdown
– Overvoltage clamp
– Load current limitation
– Self limiting of fast thermal transients
– Protection against loss of ground and loss
of V_CC
– Over temperature shutdown with auto
restart (thermal shutdown)
– Reverse battery protected (see Application
schematic⁽¹⁾ on page 22)
PowerSSO-24
– Electrostatic discharge protection
Applications
■ All types of resistive, inductive and capacitive
loads
Description
The VNQ5E050K-E is a quad channel high-side
driver manufactured in the ST proprietary
VIPower™ M0-5 technology and housed in the
tiny PowerSSO-24 package.
The VNQ5E050K-E is designed to drive automotive
grounded loads delivering protection, diagnostics
and an easy 3 V and 5 V CMOS compatible
interface with any microcontroller.
The device integrates advanced protective
functions such as load current limitation, inrush
and overload active management by power
limitation, over temperature shut-off with auto
restart and over-voltage active clamp.
A dedicated active low digital status pin is
associated with every output channel in order to
provide Enhanced diagnostic functions including
fast detection of overload and short-circuit to
ground, over temperature indication, short-circuit
to V_CC diagnosis and ON & OFF-state open-load
detection.
The diagnostic feedback of the whole device can
be disabled by pulling the STAT_DIS pin up, thus
allowing wired-ORing with other similar devices.
July 2009
Doc ID 13494 Rev 5
1/34
www.st.com
1