VNI8200XP Datasheet, PDF (1/34 Pages) STMicroelectronics – Octal high-side smart power solid state relay with serial/parallel selectable interface on chip

VNI8200XP
Octal high-side smart power solid state relay with serial/parallel
selectable interface on chip
Datasheet − preliminary data
Features
Type
V_demag(1) R_DS(on)(1)
VNI8200XP V_CC-45 V 0.11 Ω
1. Per channel
I_out(1)
0.7 A
V_CC
45 V
■ Output current: 0.7 A per channel
■ Serial/parallel selectable interface
■ Short-circuit protection
■ 8-bit and 16-bit SPI Interface for IC command
and control diagnostic
■ Channel overtemperature detection and
protection
■ Thermal independence of separate channels
■ Drives all type of loads (resistive, capacitive,
inductive load)
■ Loss of GND protection
■ Power Good diagnostic
■ Undervoltage shutdown with hysteresis
■ Overvoltage protection (V_CC clamping)
■ Very low supply current
■ Common fault open drain output
■ IC warning temperature detection
■ Channels output enable
■ 100 mA high efficiency step-down switching
regulator with integrated boot diode
■ Adjustable regulator output
■ Switching regulator disable
■ 5 V and 3.3 V compatible I/Os
■ Channel outputs status LED driving 4 x 2
multiplexed array
■ Fast demagnetization of inductive loads
■ ESD protection
■ Designed to meet IEC 61131-2, IEC61000-4-4,
and IEC61000-4-5
PowerSSO-36
Applications
■ Programmable logic control
■ Industrial PC peripheral input/output
■ Numerical control machines
Table 1. Device summary
Part number
Package
VNI8200XP
VNI8200XPTR
PowerSSO-36
Packing
Tube
Tape and reel
June 2012
Doc ID 15234 Rev 4
This is preliminary information on a new product now in development or undergoing evaluation. Details are subject to
change without notice.
1/34
www.st.com
34