VNI8200XP-32 Datasheet, PDF (1/43 Pages) STMicroelectronics – Octal high-side smart power solid-state relay with serial

VNI8200XP-32
Octal high-side smart power solid-state relay with serial/parallel
selectable interface on-chip
Datasheet - production data
PowerSSO-36 package
with exposed pad down (EPD)
Features
Type
VNI8200XP-32
Vdemag⁽¹⁾
VCC-45 V
RDS(on)(1)
0.11 Ω
IOUT(1)
1A
VCC
45 V
Notes:
(1)_{Per channel}
 Output current: 1 A per channel
 Serial/parallel selectable interface
 Short-circuit protection
 8-bit and 16-bit SPI interface for IC
command and control diagnostic
 Channel overtemperature detection and
protection
 Thermal independence of separate channels
 All type of loads (resistive, capacitive,
inductive load) are driven
 Loss of GND protection
 Power Good diagnostic
 Undervoltage shutdown with hysteresis
 Overvoltage protection (V_CC clamping)
 Very low supply current
 Common fault open drain output
 IC warning temperature detection
 Channel output enable
 100 mA high efficiency step-down switching
regulator with integrated boot diode
 Adjustable regulator output
 Switching regulator disable
 5 V and 3.3 V compatible I/Os
 Channel output status LED driving 4x2
multiplexed array
 Fast demagnetization of inductive loads
 ESD protection
 Designed to meet IEC61131-2,
IEC61000-4-4 and IEC61000-4-5
Applications
 Programmable logic control
 Industrial PC peripheral input/output
 Numerical control machines
Table 1: Device summary
Order code
Package
Packing
VNI8200XP-32
PowerSSO-36
VNI8200XPTR-32
Tube
Tape and
reel
August 2015
DocID027849 Rev 3
This is information on a product in full production.
1/43
www.st.com