VNH7013XP-E Datasheet, PDF (1/24 Pages) STMicroelectronics – Automotive integrated H-bridge

VNH7013XP-E
Automotive integrated H-bridge
Features
Type
R_DS(on)
I_out
V_ccmax
VNH7013XP-E
13 mΩ typ
(per leg)
40 A 72 V⁽¹⁾
1. Per leg: sum of the two BV_dss (HSD + LSD);
V_CC > 36 V whole bridge must be switched off;
■ Maximum V_CC voltage: 72 V
■ 10 V compatible inputs
■ R_DS(on) per leg: 13 mΩ typical
■ Embedded thermal sensor: -8.1 mV/°K
■ Very low stray inductance in power line
Description
The VNH7013XP-E is an automotive integrated
H-bridge intended for a wide range of automotive
applications driving DC motors. The device
incorporates a dual channel and two single
channel MOSFETs. All the devices are designed
using STMicroelectronics^® well known and
proven proprietary VIPower^® M0-S7 technology
that allows to integrate in a package four different
channels in H-bridge topology.
This package, specifically designed for the harsh
automotive environment offers improved thermal
performance thanks to exposed die pads.
Moreover, its fully symmetrical mechanical design
allows superior manufacturability at board level.
PowerSSO-36 TP
Table 1. Device summary
Package
PowerSSO-36 TP
Tube
VNH7013XP-E
Order codes
Tape and reel
VNH7013XPTR-E
January 2012
Doc ID 022370 Rev 3
1/24
www.st.com
1