VND830SP-E Datasheet, PDF (1/28 Pages) STMicroelectronics – DOUBLE CHANNEL HIGH SIDE DRIVER

VND830SP-E
Double channel high-side driver
Features
Type
R_DS(on)
VND830SP-E 60 mΩ⁽¹⁾
1. Per each channel.
I_OUT
6 A⁽¹⁾
V_CC
36 V
■ ECOPACK^®: lead free and RoHS compliant
■ Automotive Grade: compliance with AEC
guidelines
■ Very low standby current
■ CMOS compatible input
■ On-state open-load detection
■ Off-state open-load detection
■ Thermal shutdown protection and diagnosis
■ Undervoltage shutdown
■ Overvoltage clamp
■ Output stuck to V_CC detection
■ Load current limitation
■ Reverse battery protection
■ Electrostatic discharge protection
10
1
PowerSO-10
Description
The VND830SP-E is a monolithic device made by
using STMicroelectronics™ VIPower™ M0-3
technology, intended for driving any kind of load
with one side connected to ground.
Active V_CC pin voltage clamp protects the device
against low energy spikes (see ISO7637 transient
compatibility table).
Active current limitation combined with thermal
shutdown and automatic restart protects the
device against overload. The device detects
open-load condition both is on-state and off-state.
Output shorted to V_CC is detected in the off-state.
Device automatically turns-off in case of ground
pin disconnection.
Table 1. Device summary
Package
PowerSO-10
Tube
VND830SP-E
Order codes
Tape and reel
VND830SPTR-E
September 2013
Doc ID 10879 Rev 3
1/28
www.st.com
1