 English |
|
|
|
|
|
|
|
| VND830MSP-E Datasheet, PDF (1/20 Pages) STMicroelectronics – DOUBLE CHANNEL HIGH SIDE DRIVER | |||
| |||
|
®
VND830MSP-E
DOUBLE CHANNEL HIGH SIDE DRIVER
Table 1. General Features
Type
RDS(on)
VND830MSP-E 60 m⦠(*)
(*) Per each channel
IOUT
6 A (*)
VCC
36 V
s CMOS COMPATIBLE INPUTS
s OPEN DRAIN STATUS OUTPUTS
s ON STATE OPEN LOAD DETECTION
s OFF STATE OPEN LOAD DETECTION
s SHORTED LOAD PROTECTION
s UNDERVOLTAGE AND OVERVOLTAGE
SHUTDOWN
s LOSS OF GROUND PROTECTION
s VERY LOW STAND-BY CURRENT
s REVERSE BATTERY PROTECTION (**)
s IN COMPLIANCE WITH THE 2002/95/EC
EUROPEAN DIRECTIVE
DESCRIPTION
The VND830MSP-E is a monolithic device
designed in STMicroelectronics VIPower M0-3
Technology, intended for driving any kind of load
with one side connected to ground.
Active VCC pin voltage clamp protects the device
against low energy spikes (see ISO7637 transient
compatibility table).
Figure 1. Package
10
1
PowerSO-10â¢
Active current limitation combined with thermal
shutdown and automatic restart protects the
device against overload. The device detects open
load condition both in on and off state. Output
shorted to VCC is detected in the off state. The
openload threshold is aimed at detecting the 5W/
12V standard bulb as an openload fault in the on
state. Device automatically turns off in case of
ground pin disconnection.
Table 2. Order Codes
Package
PowerSO-10â¢
Note: (**) See application schematic at page 9
Tube
VND830MSP-E
Tape and Reel
VND830MSPTR-E
October 2004
REV. 1
1/20
|
▷ |
German
Russian
Spanish
Italian
Polish
Chinese
Japanese
Korean
French
Portuguese