VND830LSP Datasheet, PDF (1/27 Pages) STMicroelectronics – Double channel high-side driver

Features
Type
VND830LSP
R_DS(on)
60 mΩ⁽¹⁾
1. Per each channel.
I_OUT
18 A⁽¹⁾
V_CC
36 V
■ CMOS compatible inputs
■ Open drain status outputs
■ On-state open-load detection
■ Off-state open-load detection
■ Shorted load protection
■ Undervoltage and overvoltage shutdown
■ Loss of ground protection
■ Very low standby current
■ Reverse battery protection
VND830LSP
Double channel high-side driver
10
1
PowerSO-10
Description
The VND830LSP is a monolithic device designed
using|STMicroelectronics™ VIPower™ M0-3
Technology. The VND830LSP is intended for
driving any type of multiple load with one side
connected to ground.
The Active V_CC pin voltage clamp protects the
device against low energy spikes (see ISO7637
transient compatibility table). Active current
limitation combined with thermal shutdown and
automatic restart protects the device against
overload.
The open-load threshold is aimed at detecting the
5 W / 12 V standard bulb as an open-load fault in
the on-state.
The device detects the open-load condition in
both the on and off-state. In the off-state the
device detects if the output is shorted to V_CC. The
device automatically turns off in the case where
the ground pin becomes disconnected.
Table 1. Device summary
Package
PowerSO-10
October 2010
Tube
VND830LSP
Order codes
Tape and reel
VND830LSP13TR
Doc ID 9431 Rev 4
1/27
www.st.com
1