 English |
|
|
|
|
|
|
|
| VND830LSP-E Datasheet, PDF (1/20 Pages) STMicroelectronics – DOUBLE CHANNEL HIGH SIDE DRIVER | |||
| |||
|
VND830LSP-E
DOUBLE CHANNEL HIGH SIDE DRIVER
Table 1. General Features
Type
RDS(on)
Iout
VCC
VND830LSP-E 60m⦠(*) 18A (*)
36V
(*) Per each channel
s CMOS COMPATIBLE INPUTS
s OPEN DRAIN STATUS OUTPUTS
s ON STATE OPEN LOAD DETECTION
s OFF STATE OPEN LOAD DETECTION
s SHORTED LOAD PROTECTION
s UNDERVOLTAGE AND OVERVOLTAGE
SHUTDOWN
s LOSS OF GROUND PROTECTION
s VERY LOW STAND-BY CURRENT
s REVERSE BATTERY PROTECTION (**)
s IN COMPLIANCE WITH THE 2002/95/EC
EUROPEAN DIRECTIVE
DESCRIPTION
The VND830LSP-E is a monolithic device made
by using STMicroelectronics VIPower M0-3
Technology, intended for driving any kind of load
with one side connected to ground.
Active VCC pin voltage clamp protects the device
against low energy spikes (see ISO7637 transient
Figure 1. Package
10
1
PowerSO-10â¢
compatibility table). Active current limitation
combined with thermal shutdown and automatic
restart protects the device against overload. The
device detects open load condition both in on and
off state. The openload threshold is aimed at
detecting the 5W/12V standard bulb as an
openload fault in the on state. Device
automatically turns off in case of ground pin
disconnection.
Table 2. Order Codes
Package
PowerSO-10â¢
Tube
VND830LSP-E
Note: (**) See application schematic at page 9
Tape and Reel
VND830LSPTR-E
October 2004
Rev. 1
1/20
|
▷ |
German
Russian
Spanish
Italian
Polish
Chinese
Japanese
Korean
French
Portuguese