VND830E Datasheet, PDF (1/20 Pages) STMicroelectronics – DOUBLE CHANNEL HIGH SIDE DRIVER

VND830-E
DOUBLE CHANNEL HIGH SIDE DRIVER
Table 1. General Features
Figure 1. Package
Type
R_DS(on)
I_out
V_CC
VND830-E
(*) Per each channel
60mΩ (*)
6A (*)
36V
t(s) ^{■ CMOS COMPATIBLE INPUTS}
c ^{■ OPEN DRAIN STATUS OUTPUTS}
u ■ ON STATE OPEN LOAD DETECTION
d _{■ OFF STATE OPEN LOAD DETECTION}
ro _{■ SHORTED LOAD PROTECTION}
P _{■ UNDERVOLTAGE AND OVERVOLTAGE}
te ^SHUTDOWN
le ^{■ LOSS OF GROUND PROTECTION}
o ■ VERY LOW STAND-BY CURRENT
s _{■ REVERSE BATTERY PROTECTION (**)}
Ob ^{■ IN COMPLIANCE WITH THE 2002/95/EC}
- EUROPEAN DIRECTIVE
SO-16L
t(s) DESCRIPTION
c _{The VND830-E is a monolithic device made by}
u _{using STMicroelectronics VIPower M0-3}
rod ^{Technology, intended for driving any kind of load}
with one side connected to ground. Active V_CC pin
P _{voltage clamp protects the devices against low}
te ^{energy spikes (see ISO7637 transient}
Obsole ^{compatibility table).}
Active current limitation combined with thermal
shutdown and automatic restart protects the
device against overload. The device detects open
load condition both is on and off state. Output
shorted to V_CC is detected in the off state. Device
automatically turns off in case of ground pin
disconnection.
Table 2. Order Codes
Package
SO-16L
VND830-E
Tube
Note: (*) See application schematic at page 9
Tape and Reel
VND830TR-E
February 2005
Rev. 3
1/20