VND830ASPTR-E Datasheet, PDF (1/27 Pages) STMicroelectronics – Double channel high-side solid state relay

VND830ASP-E
Double channel high-side solid state relay
Features
Type
VND830ASP-E
1. Per channel
R_DS(on)
60 mΩ
I_OUT
6 A⁽¹⁾
V_CC
36 V⁽¹⁾
■ ECOPACK^®: lead free and RoHS compliant
■ Automotive Grade: compliance with AEC
guidelines
■ Very low standby current
■ CMOS compatible input
■ Proportional load current sense
■ Current sense disable
■ Thermal shutdown protection and diagnosis
■ Undervoltage shutdown
■ Overvoltage clamp
■ Load current limitation
10
1
PowerSO-10
Description
The VND830ASP-E is a monolithic device made
using STMicroelectronics™ VIPower™ M0-3
technology. It is intended for driving any kind of
load with one side connected to ground. Active
V_CC pin voltage clamp protects the device against
low energy spikes (see ISO7637 transient
compatibility table).
This device has two channels in high-side
configuration; each channel has an analog sense
output on which the sensing current is
proportional (according to a known ratio) to the
corresponding load current.
Built-in thermal shutdown and outputs current
limitation protect the chip from overtemperature
and short circuit. Device turns-off in case of
ground pin disconnections.
Table 1. Device summary
Package
Power-SO-10™
Tube
VND830ASP-E
Order codes
Tape and reel
VND830ASPTR-E
September 2013
Doc ID 17605 Rev 2
1/27
www.st.com
1