VND830 Datasheet, PDF (1/19 Pages) STMicroelectronics – DOUBLE CHANNEL HIGH SIDE DRIVER

®
VND830
DOUBLE CHANNEL HIGH SIDE DRIVER
TYPE
VND830
R_DS(on)
60 mΩ (*)
I_OUT
6 A (*)
V_CC
36 V
(*) Per each channel
s CMOS COMPATIBLE INPUTS
s OPEN DRAIN STATUS OUTPUTS
s ON STATE OPEN LOAD DETECTION
s OFF STATE OPEN LOAD DETECTION
s SHORTED LOAD PROTECTION
s UNDERVOLTAGE AND OVERVOLTAGE
SHUTDOWN
s LOSS OF GROUND PROTECTION
s VERY LOW STAND-BY CURRENT
s REVERSE BATTERY PROTECTION (**)
SO-16L
ORDER CODES
PACKAGE
TUBE
T&R
SO-16L
VND830
VND83013TR
DESCRIPTION
The VND830 is a monolithic device made by
using STMicroelectronics VIPower M0-3
Technology, intended for driving any kind of load
with one side connected to ground.
Active V_CC pin voltage clamp protects the devices
against low energy spikes (see ISO7637 transient
BLOCK DIAGRAM
compatibility table). Active current limitation
combined with thermal shutdown and automatic
restart protects the device against overload. The
device detects open load condition both is on and
off state. Output shorted to V_CC is detected in the
off state. Device automatically turns off in case of
ground pin disconnection.
V_CC
GND
INPUT1
STATUS1
INPUT2
STATUS2
V_CC
CLAMP
OVERVOLTAGE
UNDERVOLTAGE
CLAMP 1
DRIVER 1
OVERTEMP. 1
LOGIC
CURRENT LIMITER 1
OPENLOAD ON 1
OPENLOAD OFF 1
OVERTEMP. 2
(**) See application schematic at page 8
July 2002
DRIVER 2
CLAMP 2
CURRENT LIMITER 2
OPENLOAD ON 2
OPENLOAD OFF 2
OUTPUT1
OUTPUT2
1/19