VND810P-E Datasheet, PDF (1/28 Pages) STMicroelectronics – Double channel high-side driver

VND810P-E
Double channel high-side driver
Features
Type
VND810P-E
R_DS(on)
160 mΩ⁽¹⁾
1. Per each channel.
I_OUT
3.5 A⁽¹⁾
V_CC
36 V
■ ECOPACK®: lead free and RoHS compliant
■ Automotive Grade: compliance with AEC
Guidelines
■ Very low standby current
■ CMOS compatible input
■ On-state open-load detection
■ Off-state open-load detection
■ Thermal shutdown protection and diagnosis
■ Undervoltage shutdown
■ Overvoltage clamp
■ Output stuck to V_CC detection
■ Load current limitation
■ Reverse battery protection
■ Electrostatic discharge protection
SO-16
Description
The VND810P-E is a monolithic device designed
in STMicroelectronics™ VIPower™ M0-3
technology, intended for driving any kind of load
with one side connected to ground.
Active V_CC pin voltage clamp protects the device
against low energy spikes (see ISO7637 transient
compatibility table).
Active current limitation combined with thermal
shutdown and automatic restart protect the device
against overload.
The device detects open-load condition both in
on-state and off-state. Output shorted to V_CC is
detected in the off-state. Device automatically
turns off in case of ground pin disconnection.
Table 1. Device summary
Package
SO-16
September 2013
Tube
VND810P-E
Order codes
Tape and reel
VND810PTR-E
Doc ID 17606 Rev 2
1/28
www.st.com
1