VND600SP-E Datasheet, PDF (1/27 Pages) STMicroelectronics – Double channel high-side driver

VND600SP-E
Double channel high-side driver
Features
Type
VND600SP-E
R_DS(on)
30 mΩ
I_lim
25 A
V_CC
36 V
■ ECOPACK^®: lead free and RoHS compliant
■ Automotive Grade: compliance with AEC
Guidelines
■ Very low standby current
■ CMOS compatible input
■ Proportional load current sense
■ Current sense disable
■ Thermal shutdown protection and diagnosis
■ Undervoltage shutdown
■ Overvoltage clamp
■ Load current limitation
10
1
PowerSO-10™
Description
The VND600SP-E is a monolithic device made
using STMicroelectronics™ VIPower™ M0-3
technology. It is intended for driving resistive or
inductive loads with one side connected to
ground. Active V_CC pin voltage clamp protects the
device against low energy spikes (see ISO7637
transient compatibility table).
This device has two channels in high-side
configuration; each channel has an analog sense
output on which the sensing current is
proportional (according to a known ratio) to the
corresponding load current.
Built-in thermal shutdown and outputs current
limitation protect the chip from overtemperature
and short circuit. Device turns-off in case of
ground pin disconnections.
Table 1. Device summary
Package
PowerSO-10™
Tube
VND600SP-E
Order codes
Tape and reel
VND600SPTR-E
February 2011
Doc ID 10876 Rev 3
1/26
www.st.com
1