VND600P-E Datasheet, PDF (1/26 Pages) STMicroelectronics – Double channel high-side solid state relay

VND600P-E
Double channel high-side solid state relay
Features
Type
VND600P-E
R_DS(on)
35 mΩ
I_OUT
25 A⁽¹⁾
V_CC
36 V
1. Per channel with all the output pins connected to the
PCB.
■ CMOS-compatible input
■ Proportional load current sense
■ Shorted load protection
■ Undervoltage and overvoltage shutdown
■ Overvoltage clamp
■ Thermal shutdown
■ Current limitation
■ Protection against loss of ground and loss of
V_CC
■ Very low standby power dissipation
■ Reverse battery protected
SO-16L
Description
The VND600P-E is a double chip device designed
in STMicroelectronics™ VIPower™ M0-3
technology. The device is intended for driving any
type of load with one side connected to ground.
The active V_CC pin voltage clamp protects the
device against low energy spikes (see ISO7637
transient compatibility table).
Active current limitation combined with thermal
shutdown and automatic restart protect the device
against overload.
The device integrates an analog current sense
output which delivers a current proportional to the
load current. The device automatically turns off in
the case where the ground pin becomes
disconnected.
Table 1. Device summary
Package
SO-16L
September 2013
Tube
VND600P-E
Order codes
Tape and reel
VND600PTR-E
Doc ID 17749 Rev 2
1/26
www.st.com
1