VND5E050MCJ-E Datasheet, PDF (1/40 Pages) STMicroelectronics – Double-channel high-side driver with analog current sense for automotive applications

VND5E050MCJ-E
VND5E050MCK-E
Double-channel high-side driver with analog current sense
for automotive applications
Features
Max transient supply voltage
V_CC
41 V
Operating voltage range
V_CC 4.5 V to 28 V
Max on-state resistance (per ch.) R_ON 50 m
Current limitation (typ)
Off-state supply current
I_LIMH
I_S
27 A
2 µA⁽¹⁾
1. Typical value with all loads connected.
■ General
– Inrush current active management by
power limitation
– Very low standby current
– 3.0 V CMOS compatible inputs
– Optimized electromagnetic emissions
– Very low electromagnetic susceptibility
– Compliance with European directive
2002/95/EC
– Very low current sense leakage
■ Diagnostic functions
– Proportional load current sense
– High-precision current sense for wide
currents range
– Current sense disable
– Overload and short to ground (power
limitation) indication
– Thermal shutdown indication
■ Protections
– Undervoltage shutdown
– Overvoltage clamp
– Load current limitation
– Self limiting of fast thermal transients
– Protection against loss of ground and loss
of V_CC
– Overtemperature shutdown with auto
restart (thermal shutdown)
– Reverse battery protected
PowerSSO-12
PowerSSO-24
– Electrostatic discharge protection
Applications
■ All types of resistive, inductive and capacitive
loads
■ Suitable as LED driver
Description
The VND5E050MCJ-E and VND5E050MCK-E
are double channel high-side drivers
manufactured using ST proprietary VIPower^®
M0-5 technology and housed in PowerSSO-12
and PowerSSO-24 packages. The devices are
designed to drive 12 V automotive grounded
loads, and to provide protection and diagnostics.
They also implement a 3 V and 5 V CMOS-
compatible interface for the use with any
microcontroller.
The devices integrate advanced protective
functions such as load current limitation, inrush
and overload active management by power
limitation, overtemperature shut-off with
auto-restart and overvoltage active clamp. A
dedicated analog current sense pin is associated
with every output channel providing enhanced
diagnostic functions including fast detection of
overload and short-circuit to ground through
power limitation indication and overtemperature
indication.
The current sensing and diagnostic feedback of
the whole device can be disabled by pulling the
CS_DIS pin high to share the external sense
resistor with similar devices.
September 2013
Doc ID 022514 Rev 2
1/40
www.st.com
1