VND5E025MKTR-E Datasheet, PDF (1/35 Pages) STMicroelectronics – Double-channel high-side driver with analog current sense for automotive applications

VND5E025MK-E
Double-channel high-side driver with analog current sense
for automotive applications
Features
Max transient supply voltage
V_CC
41 V
Operating voltage range
V_CC 4.5 to 28 V
Max on-state resistance (per ch.) R_ON 25 mΩ
Current limitation (typ)
Off-state supply current
I_LIMH
I_S
60 A
2 µA⁽¹⁾
1. Typical value with all loads connected.
■ General
– Inrush current active management by
power limitation
– Very low standby current
– 3.0V CMOS compatible inputs
– Optimized electromagnetic emissions
– Very low electromagnetic susceptibility
– In compliance with the 2002/95/EC
european directive
– Very low current sense leakage
■ Diagnostic functions
– Proportional load current sense
– High current sense precision for wide
currents range
– Current sense disable
– Overload and short to ground (power
limitation) indication
– Thermal shutdown indication
■ Protections
– Undervoltage shutdown
– Overvoltage clamp
– Load current limitation
– Self limiting of fast thermal transients
– Protection against loss of ground and loss
of V_CC
– Overtemperature shutdown with auto
restart (thermal shutdown)
PowerSSO-24
– Reverse battery protected (see Figure 29:
Application schematic⁽¹⁾)
– Electrostatic discharge protection
Applications
■ All types of resistive, inductive and capacitive
loads
■ Suitable as LED driver
Description
The VND5E025MK-E is a double-channel high-
side drivers manufactured in the ST proprietary
VIPower™ M0-5 technology and housed in the
tiny PowerSSO-24 package.
The VND5E025MK-E is designed to drive 12V
automotive grounded loads delivering protection,
diagnostics and easy 3V and 5V CMOS
compatible interface with any microcontroller.
The device integrates advanced protective
functions such as load current limitation, inrush
and overload active management by power
limitation, overtemperature shut-off with
auto-restart and overvoltage active clamp.
A dedicated analog current sense pin is
associated with every output channel in order to
provide Enhanced diagnostic functions including
fast detection of overload and short-circuit to
ground through power limitation indication and
overtemperature indication.
The current sensing and diagnostic feedback of
the whole device can be disabled by pulling the
CS_DIS pin high to allow sharing of the external
sense resistor with other similar devices.
September 2013
Doc ID 16471 Rev 2
1/35
www.st.com
1