|
VND5E025AKTR-E Datasheet, PDF (1/38 Pages) STMicroelectronics – Double channel high-side driver with analog current sense for automotive applications | |||
|
VND5E025AK-E
Double channel high-side driver with analog current sense
for automotive applications
Features
Max transient supply voltage
Operating voltage range
Max on-state resistance (per ch.)
Current limitation (typ)
Off-state supply current
VCC
VCC
RON
ILIMH
IS
1. Typical value with all loads connected.
41 V
4.5 to 28 V
25 mΩ
60 A
2 µA(1)
â General
â Inrush current active management by
power limitation
â Very low standby current
â 3.0 V CMOS compatible inputs
â Optimized electromagnetic emissions
â Very low electromagnetic susceptibility
â In compliance with the 2002/95/EC
european directive
â Very low current sense leakage
â Diagnostic functions
â Proportional load current sense
â High current sense precision for wide
currents range
â Current sense disable
â Off-state open- load detection
â Output short to VCC detection
â Overload and short to ground (power
limitation) indication
â Thermal shutdown indication
â Protections
â Undervoltage shutdown
â Overvoltage clamp
â Load current limitation
â Self limiting of fast thermal transients
â Protection against loss of ground and loss
of VCC
â Overtemperature shutdown with auto
restart (thermal shutdown)
PowerSSO-24
â Reverse battery protected
â Electrostatic discharge protection
Applications
â All types of resistive, inductive and capacitive
loads
â Suitable as LED driver
Description
The VND5E025AK-E is a double channel high-
side driver manufactured in the ST proprietary
VIPower M0-5 technology and housed in the tiny
PowerSSO-24 package. The VND5E025AK-E is
designed to drive 12 V automotive grounded
loads delivering protection, diagnostics and an
easy 3 V and 5 V CMOS compatible interface with
any microcontroller.
The device integrates advanced protective
functions such as load current limitation, inrush
and overload active management by power
limitation, overtemperature shut-off with auto
restart and overvoltage active clamp. A dedicated
analog current sense pin is associated with every
output channel in order to provide enhanced
diagnostic functions including fast detection of
overload and short-circuit to ground through
power limitation indication, overtemperature
indication, short-circuit to VCC diagnosis and
on-state and off-state open-load detection. The
current sensing and diagnostic feedback of the
whole device can be disabled by pulling the
CS_DIS pin high to allow sharing of the external
sense resistor with other similar devices.
September 2013
Doc ID 14618 Rev 5
1/38
www.st.com
1
|
▷ |