|
VND5E006ASP-E Datasheet, PDF (1/37 Pages) STMicroelectronics – Double channel high-side driver with analog current sense for automotive applications | |||
|
VND5E006ASP-E
Double channel high-side driver with analog current sense
for automotive applications
Datasheet - production data
PowerSO-16
Features
Max transient supply voltage
VCC
41 V
Operating voltage range
Typ on-state resistance (per ch.)
Current limitation (typ)
Off-state supply current
VCC 4.5 to 28 V
RON 5 mΩ
ILIMH
IS
100 A
2 µA(1)
1. Typical value with all loads connected.
⢠General
â Very low standby current
â 3.0 V CMOS compatible inputs
â Optimized electromagnetic emissions
â Very low electromagnetic susceptibility
â Compliance with European directive
2002/95/EC
â Very low current sense leakage
⢠Diagnostic functions
â Proportional load current sense
â High current sense precision for wide
currents range
â Current sense disable
â Off-state openload detection
â Output short to VCC detection
â Overload and short to ground (power
limitation) indication
â Thermal shutdown indication
⢠Protection
â Undervoltage shutdown
â Overvoltage clamp
â Load current limitation
â Self limiting of fast thermal transients
â Protection against loss of ground and loss
of VCC
â Overtemperature shutdown with auto
restart (thermal shutdown)
â Inrush current active management by
power limitation
â Reverse battery protected with self switch
of the PowerMOS
â Electrostatic discharge protection
Applications
⢠All types of resistive, inductive and capacitive
loads
Description
The VND5E006ASP-E is a double channel
high-side driver manufactured using ST
proprietary VIPower⢠M0-5 technology and
housed in PowerSO-16 package. The device is
designed to drive 12 V automotive grounded
loads, and to provide protection and diagnostics.
They also implement a 3 V and 5 V CMOS
compatible interface for the use with any
microcontroller.
The device integrates advanced protective
functions such as load current limitation, inrush
and overload active management by power
limitation, overtemperature shut-off with auto
restart and overvoltage active clamp. A dedicated
analog current sense pin is associated with every
output channel providing enhanced diagnostic
functions including fast detection of overload and
short-circuit to ground through power limitation
indication, overtemperature indication, short-
circuit to VCC diagnosis and on-state and off-state
open-load detection. The current sensing and
diagnostic feedback of the whole device can be
disabled by pulling the CS_DIS pin high to share
the external sense resistor with similar devices.
October 2013
This is information on a product in full production.
DocID17362 Rev 6
1/37
www.st.com
|
▷ |