VND5160J-E Datasheet, PDF (1/31 Pages) STMicroelectronics – Double channel high side driver for automotive applications

VND5160J-E
Double channel high side driver for automotive applications
Features
Max supply voltage
V_CC
Operating voltage range
V_CC
Max on-state resistance
R_ON
Current limitation (typ)
I_LIMH
Off state supply current (typ)
I_S
1. Typical value with all loads connected.
41V
4.5 to 36V
160 mΩ
5A
2 µA⁽¹⁾
PowerSSO-12
– Electrostatic discharge protection
Application
■ General
– Inrush current active management by
power limitation
– Very low stand-by current
– 3.0V CMOS compatible input
– Optimized electromagnetic emission
– Very low electromagnetic susceptibility
– In compliance with the 2002/95/EC
European directive
■ Diagnostic functions
– Open drain status output
– On state open load detection
– Off state open load detection
– Thermal shutdown indication
■ Protection
– Undervoltage shut-down
– Overvoltage clamp
– Output stuck to Vcc detection
– Load current limitation
– Self limiting of fast thermal transients
– Protection against loss of ground and loss
of V_CC
– Thermal shut down
– Reverse battery protection (see Figure 28)
Table 1. Device summary
■ All types of resistive, inductive and capacitive
loads
Description
The VND5160J-E is a monolithic device made
using STMicroelectronics VIPower M0-5
technology. It is intended for driving resistive or
inductive loads with one side connected to
ground. Active V_CC pin voltage clamp protects the
device against low energy spikes (see ISO7637
transient compatibility table).
The device detects open load condition in both
ON and OFF states, when STAT_DIS is left open
or driven low. Output shorted to V_CC is detected in
the OFF state.
When STAT_DIS is driven high, the STATUS pin is
in a high impedance condition.
Output current limitation protects the device in
overload condition. In case of long duration
overload, the device limits the dissipated power to
safe level up to thermal shut-down intervention.
Thermal shut-down with automatic restart allows
the device to recover normal operation as soon as
fault condition disappears.
Package
Order codes
Part number (Tube)
Part number (Tape & Reel)
PowerSSO-12
VND5160J-E
VND5160JTR-E
December 2007
Rev 5
1/31
www.st.com
31