VND5025LAK-E Datasheet, PDF (1/31 Pages) STMicroelectronics – Double channel high side driver with analog current sense for automotive applications

VND5025LAK-E
Double channel high side driver with analog
current sense for automotive applications
Features
Max supply voltage
Operating voltage range
Max on-state resistance (per ch.)
Current limitation (typ)
Off state supply current
V_CC
41V
V_CC 4.5 to 36V
R_ON 25mΩ
I_LIMH
I_S
60A
2µA⁽¹⁾
1. Typical value with all loads connected
■ Features
– In-rush current active management by
power limitation
– Very low stand-by current
– 3.0V CMOS compatible input
– Optimized electromagnetic emission
– Very low electromagnetic susceptibility
– In compliance with the 2002/95/EC
European directive
– Package: ECOPACK^®
■ Diagnostic functions
– Proportional load current sense
– High current sense precision for wide range
currents
– Current sense disable
– Thermal shutdown indication
– Very low current sense leakage
■ Protection
– Undervoltage shut-down
– Overvoltage clamp
– Load current limitation
– Self-limiting of fast thermal transients
– Protection against loss of ground and loss
of V_CC
PowerSSO-24™
– Thermal shut down
– Reverse battery protection^(a)
– Electrostatic discharge protection
Description
The VND5025LAK-E is a monolithic device made
using STMicroelectronics VIPower M0-5
technology, intended for driving resistive or
inductive loads with one side connected to
ground, and suitable for driving LEDs.
Active V_CC pin voltage clamp protects the device
against low energy spikes (see ISO7637 transient
compatibility table).
This device integrates an analog current sense
which delivers a current proportional to the load
current (according to a known ratio) when
CS_DIS is driven low or left open.
When CS_DIS is driven high, the CURRENT
SENSE pin is in a high impedance condition.
Output current limitation protects the device in
overload condition. In case of long overload
duration, the device limits the dissipated power to
safe level up to thermal shut-down intervention.
Thermal shut-down with automatic restart allows
the device to recover normal operation as soon as
fault condition disappears.
Table 1. Order codes
Package
PowerSSO-24™
a. See Figure 26: Application schematic
Tube
VND5025LAK-E
Tape and Reel
VND5025LAKTR-E
March 2007
Rev 3
1/31
www.st.com
1