VND10B_04 Datasheet, PDF (1/13 Pages) STMicroelectronics – DOUBLE CHANNEL HIGH SIDE SMART POWER SOLID STATE RELAY

VND10B
DOUBLE CHANNEL
HIGH SIDE SMART POWER SOLID STATE RELAY
Table 1. General Features
Type
V_DSS R_DS(on)
I_n(1)
V_CC
VND10B
40 V
0.1 Ω 3.4 A
26 V
Note: 1. In= Nominal current according to ISO definition for high
side automotive switch. The Nominal Current is the
current at T_c = 85 °C for battery voltage of 13V which
produces a voltage drop of 0.5 V.
■ OUTPUT CURRENT (CONTINUOUS):
14 A @ T_c=85°C PER CHANNEL
■ 5V LOGIC LEVEL COMPATIBLE INPUT
■ THERMAL SHUT-DOWN
■ UNDER VOLTAGE PROTECTION
■ OPEN DRAIN DIAGNOSTIC OUTPUT
■ INDUCTIVE LOAD FAST DEMAGNETIZATION
■ VERY LOW STAND-BY POWER
DISSIPATION
Figure 1. Package
PENTAWATT
(vertical)
PENTAWATT
(horizontal)
DESCRIPTION
The VND10B is a monolithic device made using
STMicroelectronics VIPower Technology,
intended for driving resistive or inductive loads
with one side grounded. This device has two
channels, and a common diagnostic. Built-in
thermal shut-down protects the chip from over
temperature and short circuit.
The status output provides an indication of open
load in on state, open load in off state,
overtemperature conditions and stuck-on to V_CC.
Table 2. Order Codes
Package
PENTAWATT Vert.
PENTAWATT Hor.
PENTAWATT In line
Tube
VND10B
VND10B(011Y)
VND10B(012Y)
PENTAWATT
(in-line)
Tape and Reel
–
–
–
June 2004
REV. 2
1/13