VND10B Datasheet, PDF (1/11 Pages) STMicroelectronics – DOUBLE CHANNEL HIGH SIDE SMART POWER SOLID STATE RELAY

VND10B
DOUBLE CHANNEL
HIGH SIDE SMART POWER SOLID STATE RELAY
TYPE
VND10B
VDSS
40 V
R DS( on)
0.1 Ω
In(*)
3.4 A
VC C
26 V
PRELIMINARY DATA
s OUTPUT CURRENT (CONTINUOUS):
14 A @ T_c=85^oC PER CHANNEL
s 5V LOGIC LEVEL COMPATIBLE INPUT
s THERMAL SHUT-DOWN
s UNDER VOLTAGE PROTECTION
s OPEN DRAIN DIAGNOSTIC OUTPUT
s INDUCTIVE LOAD FAST DEMAGNETIZATION
s VERY LOW STAND-BY POWER DISSIPATION
HEPTAWATT
(vertical)
HEPTAWATT
(horizontal)
DESCRIPTION
The VND10B is a monolithic device made using
SGS-THOMSON Vertical Intelligent Power
Technology, intended for driving resistive or
inductive loads with one side grounded. This
device has two channels, and a common
diagnostic. Built-in thermal shut-down protects
the chip from over temperature and short circuit.
The status output provides an indication of open
load in on state, open load in off state,
overtemperature conditions and stuck-on to V_CC.
HEPTAWATT
(in-line)
ORDER CODES:
HEPTAWATT vertical VND10B
HEPTAWATT horizontal VND10B (011Y)
HEPTAWATT in-line
VND10B (012Y)
BLOCK DIAGRAM
(*) In= Nominal current according to ISO definition for hi gh side automotive switch (see note 1)
September 1994
1/11