VND10B-11-E Datasheet, PDF (1/13 Pages) STMicroelectronics – DOUBLE CHANNEL HIGH SIDE SMART POWER SOLID STATE RELAY

VND10B
DOUBLE CHANNEL
HIGH SIDE SMART POWER SOLID STATE RELAY
Table 1. General Features
Figure 1. Package
Type
V_DSS R_DS(on)
I_n(1)
V_CC
VND10B
40 V
0.1 Ω 3.4 A
26 V
) ^{Note: 1. In= Nominal current according to ISO definition for high}
t(s ^{side automotive switch. The Nominal Current is the}
current at T_c = 85 °C for battery voltage of 13V which
produces a voltage drop of 0.5 V.
duc _{■ OUTPUT CURRENT (CONTINUOUS):}
ro _{14 A @ Tc=85°C PER CHANNEL}
P _{■ 5V LOGIC LEVEL COMPATIBLE INPUT}
te _{■ THERMAL SHUT-DOWN}
le _{■ UNDER VOLTAGE PROTECTION}
so ■ OPEN DRAIN DIAGNOSTIC OUTPUT
b _{■ INDUCTIVE LOAD FAST DEMAGNETIZATION}
- ^{O ■ VERY LOW STAND-BY POWER}
) DISSIPATION
ct(s DESCRIPTION
u _{The VND10B is a monolithic device made using}
d _{STMicroelectronics VIPower Technology,}
ro _{intended for driving resistive or inductive loads}
P with one side grounded. This device has two
channels, and a common diagnostic. Built-in
te _{thermal shut-down protects the chip from over}
le temperature and short circuit.
o _{The status output provides an indication of open}
s _{load in on state, open load in off state,}
Ob^{overtemperature conditions and stuck-on to VCC.}
PENTAWATT
(vertical)
PENTAWATT
(horizontal)
PENTAWATT
(in-line)
Table 2. Order Codes
Package
PENTAWATT Vert.
PENTAWATT Hor.
PENTAWATT In line
Tube
VND10B
VND10B(011Y)
VND10B(012Y)
Tape and Reel
–
–
–
June 2004
REV. 2
1/13