VN920-E Datasheet, PDF (1/24 Pages) STMicroelectronics – HIGH SIDE DRIVER

VN920-E
VN920B5-E / VN920SO-E
HIGH SIDE DRIVER
Table 1. General Features
Type
R_DS(on)
VN920-E
VN920B5-E
VN920SO-E
16mΩ
I_OUT
30 A
V_CC
36 V
s CMOS COMPATIBLE INPUT
s PROPORTIONAL LOAD CURRENT SENSE
s SHORTED LOAD PROTECTION
s UNDERVOLTAGE AND OVERVOLTAGE
SHUTDOWN
s OVERVOLTAGE CLAMP
s THERMAL SHUTDOWN
s CURRENT LIMITATION
s PROTECTION AGAINST LOSS OF GROUND
AND LOSS OF V_CC
s VERY LOW STAND-BY POWER DISSIPATION
s REVERSE BATTERY PROTECTION (*)
s IN COMPLIANCE WITH THE 2002/95/EC
EUROPEAN DIRECTIVE
Figure 1. Package
PENTAWATT
P²PAK
SO-16L
Active current limitation combined with thermal
shutdown and automatic restart protect the device
against overload. The device integrates an analog
current sense output which delivers a current
proportional to the load current. Device
automatically turns off in case of ground pin
disconnection.
DESCRIPTION
The VN920-E, VN920B5-E, VN920SO-E is a
monolithic device made by using
STMicroelectronics VIPower M0-3 Technology,
intended for driving any kind of load with one side
connected to ground. Active V_CC pin voltage
clamp protects the device against low energy
spikes (see ISO7637 transient compatibility table).
Table 2. Order Codes
Package
PENTAWATT
P²PAK
SO-16L
Tube
VN920-E
VN920B5-E
VN920SO-E
Tape and Reel
-
VN920B5TR-E
VN920SOTR-E
Note: (*) See application schematic at page 9.
October 2004
Rev. 1
1/24