VN920-12-E Datasheet, PDF (1/23 Pages) STMicroelectronics – Single-channel high side driver

VN920-E
Single-channel high side driver
Features
Type
VN920-E
VN920-12-E
R_DS(on)
16 m
I_OUT
30 A
V_CC
36 V
• CMOS compatible input
• Proportional load current sense
• Shorted load protection
• Under voltage and overvoltage shutdown
• Overvoltage clamp
• Thermal shutdown
• Current limitation
• Protection against loss of ground and loss of
V_CC
• Very low standby power dissipation
• Reverse battery protected (see Application
schematic on page 16)
• In compliance with the 2002/95/ec european
directive
PENTAWATT
PENTAWATT
in-line
Description
The VN920-E is a monolithic device designed in
STMicroelectronics VIPower™ M0-3 technology,
intended for driving any kind of load with one side
connected to ground. Active V_CC pin voltage
clamp protects the device against low energy
spikes (see ISO7637 transient compatibility able).
Active current limitation combined with thermal
shutdown and automatic restart protect the device
against overload. The device integrates an analog
current sense output which delivers a current
proportional to the load current. Device
automatically turns off in case of ground pin
disconnection.
Table 1. Device summary
Package
PENTAWATT
PENTAWATT in-line
September 2013
Tube
VN920-E
VN920-12-E
Order codes
Tape and reel
-
-
Doc ID 10894 Rev 4
1/23
www.st.com
1