VN820-E Datasheet, PDF (1/38 Pages) STMicroelectronics – HIGH SIDE DRIVER

VN820-E / VN820B5-E
VN820PT-E / VN820SO-E / VN820SP-E
HIGH SIDE DRIVER
Table 1. General Features
Type
R_DS(on)
I_OUT
VN820-E
VN820B5-E
VN820PT-E
40 mΩ
9A
VN820SO-E
VN820SP-E
V_CC
36 V
Figure 1. Package
10
1
PowerSO-10™
P²PAK
PPAK
■ CMOS COMPATIBLE INPUT
■ ON STATE OPEN LOAD DETECTION
■ OFF STATE OPEN LOAD DETECTION
■ SHORTED LOAD PROTECTION
■ UNDERVOLTAGE AND OVERVOLTAGE
SHUTDOWN
■ PROTECTION AGAINST LOSS OF GROUND
■ VERY LOW STAND-BY CURRENT
■ REVERSE BATTERY PROTECTION (*)
■ IN COMPLIANCE WITH THE 2002/95/EC
EUROPEAN DIRECTIVE
DESCRIPTION
The VN820-E, VN820SP-E, VN820B5-E,
VN820SO-E, VN820PT-E are monolithic devices
made by using STMicroelectronics VIPower M0-3
Technology, intended for driving any kind of load
with one side connected to ground.
Active V_CC pin voltage clamp protects the device
against low energy spikes (see ISO7637 transient
compatibility table).
PENTAWATT
SO-16L
Active current limitation combined with thermal
shutdown and automatic restart protect the device
against overload.
The device detects open load condition both is on
and off state. Output shorted to V_CC is detected in
the off state. Device automatically turns off in case
of ground pin disconnection.
Table 2. Order Codes
Package
PENTAWATT
PowerSO-10™
P²PAK
SO-16L
PPAK
VN820-E
VN820SP-E
VN820B5-E
VN820SO-E
VN820PT-E
Tube
Tape and Reel
-
VN820SPTR-E
VN820-B5TR-E
VN820SOTR-E
VN820PTTR-E
Note: (*) See application schematic at page 9.
February 2005
Rev. 3
1/38