VN808SR_08 Datasheet, PDF (1/17 Pages) STMicroelectronics – Octal channel high side driver

VN808SR
Octal channel high side driver
Features
Type
VN808SR
R_DS(on)
150 mΩ
I_out
0.7 A
V_CC
45 V
■ V_CC/2 compatible input
■ Junction over-temperature protection
■ Case over-temperature protection for thermal
independence of the channels
■ Current limitation
■ Shorted load protection
■ Undervoltage shut-down
■ Protection against loss of ground
■ Very low stand-by current
■ Compliance to 61000-4-4 IEC test up to 4 kV
Description
The VN808SR is a monolithic device designed in
STMicroelectronics VIPower M0-3 technology,
intended for driving any kind of load with one side
connected to ground.
Figure 1. Block diagram
PowerSO-36
Active current limitation combined with thermal
shutdown and automatic restart, protect the
device against overload. In overload condition,
the channel turns OFF and back ON
automatically so as to maintain the junction
temperature between T_TSD and T_R. If this
condition makes the case temperature reach
T_CSD, the overloaded channel is turned OFF and
restarts only when the case temperature has
decreased to T_CR (see waveform 3 Figure 7 on
page 10). Non overloaded channels continue to
operate normally. The device automatically turns
OFF in the case of a ground pin disconnection.
This device is especially suitable for industrial
applications and conforms to IEC 61131.
July 2008
Rev 4
1/17
www.st.com
17