VN808SR Datasheet, PDF (1/16 Pages) STMicroelectronics – Octal channel high side driver

VN808SR
Octal channel high side driver
Features
Type
VN808SR
R_DS(on)
150mΩ
I_out
0.7A
V_CC
45V
■ V_CC/2 compatible input
■ Junction over-temperature protection
■ Case over-temperature protection for thermal
independence of the channels
■ Current limitation
■ Shorted load protection
■ Undervoltage shudown
■ Protection against loss of ground
■ Very low stand-by current
■ Compliance to 61000-4-4 IEC test up to 4KV
Description
The VN808SR is a monolithic device designed in
STMicroelectronics VIPower M0-3 technology,
intended for driving any kind of load with one side
connected to ground.
Figure 1. Block diagram
PowerSO-36
Active current limitation combined with thermal
shutdown and automatic restart, protect the
device against overload. In overload condition,
channel turns OFF and back ON automatically so
as to maintain junction temperature between T_TSD
and T_R. If this condition makes case temperature
reach T_CSD, overloaded channel is turned OFF
and and will restart only when case temperature
has decreased down to T_CR( see waveform 3
Figure 7 on page 10). Non overloaded channels
continue to operate normally. Device
automatically turns OFF in case of ground pin
disconnection. This device is especially suitable
for industrial applications conform to IEC 61131
March 2007
Rev 3
1/16
www.st.com
16