VN808-E_08 Datasheet, PDF (1/18 Pages) STMicroelectronics – Octal channel high side driver

VN808-E
Octal channel high side driver
Features
Type
R_DS(on) ⁽¹⁾
I_out ⁽¹⁾
V_CC
VN808-E
150 mΩ
0.7 A
45 V
1. Per channel
■ V_CC/2 compatible input
■ Junction over-temperature protection
■ Case over-temperature protection for thermal
independence of the channels
■ Current limitation
■ Shorted load protection
■ Undervoltage shut-down
■ Protection against loss of ground
■ Very low stand-by current
■ Compliance to 61000-4-4 IEC test up to 4 kV
Description
The VN808-E is a monolithic device designed in
STMicroelectronics VIPower M0-3 technology,
intended for driving any kind of load with one side
connected to ground.
Figure 1. Block diagram
PowerSO-36
Active current limitation combined with thermal
shutdown and automatic restart, protect the
device against overload. In overload condition,
channel turns OFF and back ON automatically so
as to maintain junction temperature between T_TSD
and T_R. If this condition makes case temperature
reach T_CSD, overloaded channel is turned OFF
and will restart only when case temperature has
decreased down to T_CR(see waveform 3 Figure 8
on page 11). Non overloaded channels continue
to operate normally. Device automatically turns
OFF in case of ground pin disconnection. This
device is especially suitable for industrial
applications conform to IEC 61131
August 2008
Rev 6
1/18
www.st.com
18