VN750SM-E Datasheet, PDF (1/20 Pages) STMicroelectronics – HIGH SIDE DRIVER

VN750SM-E
HIGH SIDE DRIVER
Table 1. General Features
Type
R_DS(on)
I_OUT
VN750SM-E
55 mΩ
6A
V_CC
36 V
Figure 1. Package
s CMOS COMPATIBLE INPUT
s ON STATE OPEN LOAD DETECTION
s OFF STATE OPEN LOAD DETECTION
s SHORTED LOAD PROTECTION
t(s) s UNDERVOLTAGE AND OVERVOLTAGE
SHUTDOWN
c _{s PROTECTION AGAINST LOSS OF GROUND}
du s VERY LOW STAND-BY CURRENT
ro ^{s REVERSE BATTERY PROTECTION (*)}
P s IN COMPLIANCE WITH THE 2002/95/EC
te ^{EUROPEAN DIRECTIVE}
ole DESCRIPTION
s _{The VN750SM-E is a monolithic device designed}
b _{in STMicroelectronics VIPower M0-3 Technology,}
O _{intended for driving any kind of load with one side}
- _{connected to ground.}
t(s) ^{Active VCC pin voltage clamp protects the device}
against low energy spikes (see ISO7637 transient
c _{compatibility table).}
SO-8
Active current limitation combined with thermal
shutdown and automatic restart protect the device
against overload.
The device detects open load condition both in on
and off state. The openload threshold is aimed at
detecting the 5W/12V standard bulb as an
openload fault in the on state. Output shorted to
V_CC is detected in the off state. Device
automatically turns off in case of ground pin
disconnection.
Obsolete ^{Produ Table 2. Order Codes}
Package
Tube
Tape and Reel
SO-8
VN750SM-E
VN750SMTR-E
Note: (*) See application schematic at page 9.
October 2004
Rev. 1
1/20