VN750PEP Datasheet, PDF (1/14 Pages) STMicroelectronics – HIGH SIDE DRIVER

®
VN750PEP
TYPE
VN750PEP
R_DS(on)
60 mΩ
I_OUT
6A
V_CC
36 V
s CMOS COMPATIBLE INPUT
s ON STATE OPEN LOAD DETECTION
s OFF STATE OPEN LOAD DETECTION
s SHORTED LOAD PROTECTION
s UNDERVOLTAGE AND OVERVOLTAGE
SHUTDOWN
s PROTECTION AGAINST LOSS OF GROUND
s VERY LOW STAND-BY CURRENT
s REVERSE BATTERY PROTECTION (*)
DESCRIPTION
The VN750PEP is a monolithic device designed in
STMicroelectronics VIPower M0-3 Technology,
intended for driving any kind of load with one side
connected to ground.
Active V_CC pin voltage clamp protects the device
against low energy spikes (see ISO7637 transient
compatibility table). Active current limitation
combined with thermal shutdown and automatic
restart protect the device against overload.
HIGH SIDE DRIVER
TARGET SPECIFICATION
PowerSSO-12
ORDER CODES
PACKAGE
TUBE
T&R
PowerSSO-12 VN750PEP VN750PEP13TR
The device detects open load condition both is on
and off state. Output shorted to V_CC is detected in
the off state. Device automatically turns off in case
of ground pin disconnection.
BLOCK DIAGRAM
GND
V_CC
CLAMP
INPUT
LOGIC
STATUS
OVERTEMPERATURE
DETECTION
OVERVOLTAGE
DETECTION
UNDERVOLTAGE
DETECTION
Power CLAMP
DRIVER
CURRENT LIMITER
ON STATE OPENLOAD
DETECTION
OFF STATE OPENLOAD
AND OUTPUT SHORTED TO V_CC
DETECTION
V_CC
OUTPUT
(*) See application schematic at page 8
October 2003 - Revision 1.2 (Working document)
1/14
This is preliminary information on a new product foreseen to be developed. Details are subject to change without notice.