VN5E160MS-E Datasheet, PDF (1/34 Pages) STMicroelectronics – Single-channel high-side driver with analog for automotive applications

VN5E160MS-E
Single-channel high-side driver with analog
for automotive applications
Features
Max supply voltage
Operating voltage range
Max ON-state resistance
(per ch.)
V_CC
41 V
V_CC 4.5 V to 28 V
R_ON 160 mΩ
Current limitation (typ)
OFF-state supply current
I_LIMH
I_S
10 A
2 µA⁽¹⁾
1. Typical value with all loads connected.
■ General
– Inrush current active management by
power limitation
– Very low standby current
– 3.0 V CMOS compatible inputs
– Optimized electromagnetic emission
– Very low electromagnetic susceptibility
– In compliance with the 2002/95/EC
european directive
– Very low current sense leakage
■ Diagnostic functions
– Proportional load current sense
– High-precision current sense for
wide currents range
– Current sense disable
– Overload and short to ground
(power limitation) indication
– Thermal shutdown indication
■ Protections
– Undervoltage shutdown
– Overvoltage clamp
– Load current limitation
– Self-limiting of fast thermal transients
– Protection against loss of ground and loss
of V_CC
– Overtemperature shutdown with autorestart
(thermal shutdown)
– Reverse battery protected
62
("1($'5
– Electrostatic discharge protection
Applications
■ All types of resistive, inductive and capacitive
loads
■ Suitable as LED driver
Description
The VN5E160MS-E is a single-channel high-side
driver manufactured in the ST proprietary
VIPower™ M0-5 technology and housed in the
tiny SO-8 package. The VN5E160MS-E is
designed to drive 12 V automotive grounded
loads delivering protection, diagnostics and easy
3 V and 5 V CMOS compatible interface with any
microcontroller.
The device integrates advanced protective
functions such as load current limitation, inrush
and overload active management by power
limitation, overtemperature shut-off with
auto-restart and overvoltage active clamp.
A dedicated analog current sense pin is
associated with every output channel in order to
provide enhanced diagnostic functions including
fast detection of overload and short-circuit to
ground through power limitation indication and
overtemperature indication.
The current sensing and diagnostic feedback of
the whole device can be disabled by pulling the
CS_DIS pin high to allow sharing of the external
sense resistor with other similar devices.
September 2013
Doc ID 15730 Rev 4
1/34
www.st.com
1