|
VN5E025ASO-E Datasheet, PDF (1/37 Pages) STMicroelectronics – Single channel high-side driver with analog current sense for automotive applications | |||
|
VN5E025ASO-E
Single channel high-side driver with analog current sense
for automotive applications
Datasheet â production data
Features
Max supply voltage
VCC
Operating voltage range
VCC
Max on-state resistance
RON
Current limitation (typ)
ILIMH
Off-state supply current
IS
1. Typical value with all loads connected.
41 V
4.5 to 28 V
25 mΩ
60 A
2 µA(1)
â General
â Inrush current active management by
power limitation
â Very low standby current
â 3.0 V CMOS compatible inputs
â Optimized electromagnetic emissions
â Very low electromagnetic susceptibility
â Compliant with European directive
2002/95/EC
â Very low current sense leakage
â AEC-Q100 qualified
â Diagnostic functions
â Proportional load current sense
â High current sense precision for wide
currents range
â Current sense disable
â Off-state open-load detection
â Output short to VCC detection
â Overload and short to ground (power
limitation) indication
â Thermal shutdown indication
â Protections
â Undervoltage shutdown
â Overvoltage clamp
â Load current limitation
â Self limiting of fast thermal transients
â Protection against loss of ground and loss
of VCC
SO-16L
("1($'5
â Overtemperature shutdown with
autorestart (thermal shutdown)
â Reverse battery protected
â Electrostatic discharge protection
Application
â All types of resistive, inductive and capacitive
loads
â Suitable as LED driver
Description
The VN5E025ASO-E is a single channel high-
side driver manufactured using ST proprietary
VIPower® M0-5 technology and housed in
SO-16L package. The device is designed to drive
12 V automotive grounded loads, and to provide
protection and diagnostics. It also implements a
3 V and 5 V CMOS-compatible interface for use
with any microcontroller.
The device integrates advanced protective
functions such as load current limitation, inrush
and overload active management by power
limitation, overtemperature shut-off with auto-
restart and overvoltage active clamp. A dedicated
analog current sense pin is associated with every
output channel providing enhanced diagnostic
functions including fast detection of overload and
short-circuit to ground through power limitation
indication, overtemperature indication, short-
circuit to VCC diagnosis and on-state and
off-state open-load detection. The current sensing
and diagnostic feedback of the whole device can
be disabled by pulling the CS_DIS pin high to
share the external sense resistor with similar
devices.
September 2013
This is information on a product in full production.
Doc ID 022463 Rev 5
1/37
www.st.com
1
|
▷ |