VN5050J-E_07 Datasheet, PDF (1/31 Pages) STMicroelectronics – Single channel high side driver for automotive applications

VN5050J-E
Single channel high side driver
for automotive applications
Features
Max supply voltage
Operating voltage range
Max On-State resistance (per ch.)
Current limitation (typ)
Off state supply current
V_CC
V_CC
R_ON
I_LIMH
I_S
(1) Typical value with all loads connected
41V
4.5 to 36V
50 mΩ
19 A
2 µA⁽¹⁾
PowerSSO-12
Application
■ Main
– Inrush current active management by
power limitation
– Very low stand-by current
– 3.0V CMOS compatible input
– Optimized electromagnetic emission
– Very low electromagnetic susceptibility
– In compliance with the 2002/95/EC
European directive
■ Diagnostic functions
– Open drain status output
– On state open load detection
– Off state open load detection
– Thermal shutdown indication
■ Protections
– Undervoltage shut-down
– Overvoltage clamp
– Output stuck to V_CC detection
– Load current limitation
– Self limiting of fast thermal transients
– Protection against loss of ground and loss
of V_CC
– Thermal shut down
– Reverse battery protection (see Figure 27)
– Electrostatic discharge protection
Table 1. Device summary
■ All types of resistive, inductive and capacitive
loads
Description
The VN5050J-E is a monolithic device made
using STMicroelectronics VIPower technology. It
is intended for driving resistive or inductive loads
with one side connected to ground. Active V_CC pin
voltage clamp protects the device against low
energy spikes (see ISO7637 transient
compatibility table). The device detects open load
condition both in on and off state, when STAT_DIS
is left open or driven low. Output shorted to V_CC is
detected in the off state.
When STAT_DIS is driven high, the STATUS pin
is in a high impedance condition.Output current
limitation protects the device in overload
condition. In case of long duration overload, the
device limits the dissipated power to safe level up
to thermal shut-down intervention.Thermal shut-
down with automatic restart allows the device to
recover normal operation as soon as fault
condition disappears.
Package
Tube
Order codes
Tape & Reel
PowerSSO-12
VN5050J-E
VN5050JTR-E
September 2007
Rev 2
1/31
www.st.com
31