VN5012SAKTR-E Datasheet, PDF (1/30 Pages) STMicroelectronics – Single channel high side driver with analog current sense for automotive applications

VN5012AK-E
Single channel high side driver with analog current sense
for automotive applications
Datasheet − production data
Features
Max supply voltage
Operating voltage range
Max on-state resistance (per ch.)
Current limitation (typ)
Off-state supply current (typ)
V_CC
V_CC
R_ON
I_LIMH
I_S
41 V
4.5 to 36 V
12 mΩ
65 A
2 µA⁽¹⁾
1. Typical value with all loads connected
PowerSSO-24
– Reverse battery protection
– Electrostatic discharge protection
■ General features
– Inrush current active management by
power limitation
– Very low stand-by current
– 3.0 V CMOS compatible input
– Optimized electromagnetic emission
– Very low electromagnetic susceptibility
– In compliance with the 2002/95/EC
european directive
■ Diagnostic functions
– Proportional load current sense
– High current sense precision for wide range
currents
– Current sense disable
– Thermal shutdown indication
– Very low current sense leakage
■ Protections
– Undervoltage shutdown
– Overvoltage clamp
– Load current limitation
– Self limiting of fast thermal transients
– Protection against loss of ground and loss
of V_CC
– Thermal shutdown
Application
■ All types of resistive, inductive and capacitive
loads
Description
The VN5012AK-E is a monolithic device made
using STMicroelectronics VIPower^® M0-5
technology. It is intended for driving resistive or
inductive loads with one side connected to
ground. Active V_CC pin voltage clamp protects the
device against low energy spikes (see ISO7637
transient compatibility table). This device
integrates an analog current sense which delivers
a current proportional to the load current
(according to a known ratio) when CS_DIS is
driven low or left open. When CS_DIS is driven
high, the CURRENT SENSE pin is in a high
impedance condition. Output current limitation
protects the device in overload condition. In case
of long overload duration, the device limits the
dissipated power to safe level up to thermal
shutdown intervention. Thermal shutdown with
automatic restart allows the device to recover
normal operation as soon as fault condition
disappears.
Table 1. Device summary
Package
Tube
Order codes
Tape and reel
PowerSSO-24
VN5012AK-E
VN5012AKTR-E
October 2012
This is information on a product in full production.
Doc ID 13240 Rev 8
1/30
www.st.com
1