VN330SP-E Datasheet, PDF (1/15 Pages) STMicroelectronics – Quad high side smart Power solid state relay

VN330SP-E
Quad high side smart
Power solid state relay
Features
Type
V_demag(1) R_DSon(1) I_out(1)
V_CC
VN330SP-E V_CC-55V _0.32Ω ⁽²⁾ 0.7A 36V
1. Per channel.
2. At T_J = 85°C
■ Output current : 0.7A per channel
■ Digital input clamped at 32V minimum voltage
■ Shorted load and overtemperature protections
■ Built-in current limiter
■ Undervoltage shut-down
■ Open drain diagnostic output
■ Fast demagnetization of inductive loads
■ Conforms to IEC 61131-2
PowerSO-10^TM
Description
The VN330SP-E is a monolithic device made
using STMicroelectronics VIPower technology,
intended for driving four indipendent resistive or
inductive loads, with one side connected to
ground. Active current limitation avoids dropping
the system power supply in case of shorted load.
Built-in thermal shut-down protects the chip from
overtemperature and short circuit. The open drain
diagnostic output indicates overtemperature
conditions.
Figure 1. Block diagram
March 2007
Rev 3
1/15
www.st.com
15