VN330SP-32-E Datasheet, PDF (1/14 Pages) STMicroelectronics – QUAD HIGH SIDE SMART POWER SOLID STATE RELAY

VN330SP-32-E
QUAD HIGH SIDE SMART
POWER SOLID STATE RELAY
General Features
Type
V_demag(*) R_DSon(*) I_out(*) V_CC
VN330SP-32-E V_CC-55V 0.32Ω(**) 1A 36V
(*)Per channel.
(**)at TJ = 85°C
Features
■ OUTPUT CURRENT : 1A PER CHANNEL
■ DIGITAL INPUT CLAMPED AT 32V MINIMUM
VOLTAGE
■ SHORTED LOAD AND OVER-
TEMPERATURE PROTECTIONS
■ BUILT-IN CURRENT LIMITER
■ UNDERVOLTAGE SHUT-DOWN
■ OPEN DRAIN DIAGNOSTIC OUTPUT
■ FAST DEMAGNETIZATION OF INDUCTIVE
LOADS
PowerSO-10^TM
Description
The VN330SP-32-E is a monolithic device made
using STMicroelectronics VIPower Technology,
intended for driving four indipendent resistive or
inductive loads with one side connected to
ground. Active current limitation avoids dropping
the system power supply in case of shorted load.
Built-in thermal shut-down protects the chip from
overtemperature and short circuit. The open drain
diagnostic output indicates over-temperature
conditions.
Block Diagram
September 2005
Rev 3
1/14
www.st.com
14