VN16BSP_04 Datasheet, PDF (1/11 Pages) STMicroelectronics – ISO HIGH SIDE SMART POWER SOLID STATE RELAY

VN16BSP
ISO HIGH SIDE SMART POWER SOLID STATE RELAY
Table 1. General Features
Type
V_DSS R_DS(on)
VN16BPS 40 V 0.06 Ω
I_OUT
5.6 A
V_CC
26 V
Figure 1. Package
■ MAXIMUM CONTINUOUS OUTPUT
CURRENT: 20 A @ T_c= 85°C
■ 5V LOGIC LEVEL COMPATIBLE INPUT
■ THERMAL SHUT-DOWN
■ UNDER VOLTAGE PROTECTION
■ OPEN DRAIN DIAGNOSTIC OUTPUT
■ INDUCTIVE LOAD FAST DEMAGNETIZATION
■ VERY LOW STAND-BY POWER
DISSIPATION
10
1
PowerSO-10
DESCRIPTION
The VN16BPS is a monolithic device made using
STMicroelectronics VIPower Technology,
intended for driving resistive or inductive loads
with one side grounded.
Built-in thermal shut-down protects the chip from
over temperature and short circuit.
The open drain diagnostic output indicates: open
load in off state and in on state, output shorted to
V_CC and overtemperature. Fast demagnetization
of inductive loads is achieved by negative (-18V)
load voltage at turn-off.
Table 2. Order Codes
Package
PowerSO-10
Tube
VN16BSP
Tape and Reel
VN16BSP13TR
June 2004
REV. 2
1/11