VN06-E Datasheet, PDF (1/17 Pages) STMicroelectronics – ISO high side smart power solid state relay

VN06
ISO high side smart power solid state relay
Features
Type
VN06
V_DSS
60 V
R_DS(on)
0.18 Ω
I_n(1)
1.9 A
V_CC
26 V
1. In= nominal current according to ISO definition for high
side automotive switch.
■ Maximum continuous output current^(a) : 9A @
Tc= 85°C
■ 5V logic level compatible input
■ Thermal shutdown
■ Under voltage protection
■ Open drain diagnostic output
■ Inductive load fast demagnetization
■ Very low standby power dissipation
a. The maximum continuous output current is the current at
Tc = 85 °C for a battery voltage of 13V which does not activate
self protection.
PENTAWATT
Description
The VN06 is a monolithic device made using
STMicroelectronics Vertical Intelligent Power
technology, intended for driving resistive or
inductive loads with one side grounded. Built-in
thermal shutdown protects the chip from over
temperature and short circuit. The open Drain
diagnostic output indicates: open load in off state
and in on state, output shorted to V_CC and
overtemperature. Fast demagnetization of
inductive loads is archieved by negative (-18V)
load voltage at turn-off.
Table 1.
Device summary
Package
PENTAWATT
November 2008
Rev 2
Order codes
VN06
1/17
www.st.com
17