VIPER12ADIP-E Datasheet, PDF (1/21 Pages) STMicroelectronics – Low Power OFF-Line SMPS Primary Switcher

VIPer12ADIP - E
VIPer12AS - E
Low Power OFF-Line SMPS Primary Switcher
Features
■ Fixed 60kHZ Switching Frequency
■ 9V to 38V Wide Range V_DD Voltage
■ Current Mode Control
■ Auxiliary Undervoltage Lockout with Hysteresis
■ High Voltage Start-up Current Source
■ Overtemperature, Overcurrent and
Overvoltage Protection with Auto-Restart
■ Typical power capability
– European (195 - 265 Vac) 8W for SO-8,
13W for DIP-8
– European (85 - 265 Vac) 5W for SO-8,
8W for DIP-8
Description
The VIPer12A combines a dedicated current
mode PWM controller with a high voltage Power
MOSFET on the same silicon chip.
Block diagram
SO-8
DIP-8
Typical applications cover off line power supplies
for battery charger adapters, standby power
supplies for TV or monitors, auxiliary supplies for
motor control, etc.
The internal control circuit offers the following
benefits:
– Large input voltage range on the V_DD pin
accommodates changes in auxiliary supply
voltage. This feature is well adapted to
battery charger adapter configurations.
– Automatic burst mode in low load condition.
– Overvoltage protection in HICCUP mode.
DRAIN
REGULATOR
INTERNAL
SUPPLY
VDD
FB
_
8/14.5V ₊
+
42V ^_
ON/OFF
60kHz
OSCILLATOR
OVERTEMP.
DETECTOR
S
R1 FF Q
R2 R3 R4
PWM
LATCH
OVERVOLTAGE
R
LATCH
S ^FF Q
BLANKING
January 2006
DocRev1
+
_ _{0.23 V}
1 kΩ
230 Ω
SOURCE
1/21
www.st.com
21