USBP01-5M8 Datasheet, PDF (1/12 Pages) STMicroelectronics – ESD protection for enhanced micro USB interface

USBP01-5M8
ESD protection for enhanced micro USB interface
Features
■ D+/D- and ID lines protection with 7 V low
voltage diodes (LV)
■ V_BUS line protection with 32 V high voltage
diodes (HV)
■ Ultra low capacitance 0.2 pF on low voltage
diodes
■ 10 GHz bandwidth at -3 dB
■ 1.35 mm width and 0.4 mm height package
■ RoHS compliant
Complies with following standards
■ IEC 61000-4-2 level 4
– 15 kV (air discharge)
– 8 kV (contact discharge)
Applications
Where transient over-voltage protection in ESD
sensitive equipment is required for enhanced
micro USB, such as:
■ Cellular phone handsets and accessories
■ Portable multimedia players and accessories
■ Notebooks
■ Digital cameras and camcorders
■ Communication systems
Description
The USBP01-5M8 is an application specific
discrete device dedicated to ESD protection of an
enhanced mini / micro USB interface able to
manage USB, audio, TV out and FM signals.
The device is ideal for applications where both
reduced printed circuit board space and low
power absorption capability are required.
Datasheet − production data
µQFN-8L package
Figure 1. Pin configuration (top view)
VBUS/MIC 1
8 NC
D-/Ear_R 2
7 GND1
GND
D+/Ear_L 3
6 GND2
ID/TVOUT/MIC 4
5 FM RX/TX
Figure 2. Functional diagram
VBUS/MIC
GND1
D-/Ear_R
D+/Ear_L
ID/TVOUT/MIC
GND2
FM RX/TX
June 2012
This is information on a product in full production.
Doc ID 023287 Rev 1
1/12
www.st.com
12